Xiong Lin, Wang Jinyin, Liu Jiahua, Wen Shuai, Liu Chunfeng, Jiang Ping. Research on calibration method for obtaining body coordinate system coefficients matrix using non-repositioning calibration system[J]. Journal of Experiments in Fluid Mechanics, 2015, (6): 84-88. DOI: 10.11729/syltlx20140144
Citation: Xiong Lin, Wang Jinyin, Liu Jiahua, Wen Shuai, Liu Chunfeng, Jiang Ping. Research on calibration method for obtaining body coordinate system coefficients matrix using non-repositioning calibration system[J]. Journal of Experiments in Fluid Mechanics, 2015, (6): 84-88. DOI: 10.11729/syltlx20140144

Research on calibration method for obtaining body coordinate system coefficients matrix using non-repositioning calibration system

More Information
  • A non-repositioning multi-component calibration system (BCS-100 in CAAA)is developed to study the calibration method for acquiring the body coordinate system coefficients matrix.The algorithm of loads transformation from the geodetic coordinate system to the body fixed coordinate system is established based on the loading method used by BCS-100.The config-uration of the loading sleeve is developed to avoid additional moment due to the deviation of the loading direction from the center line of the loading sleeve.The error resulted from the manner of displacement measure is analyzed and the method to reduce the error is proposed also.The differ-ences between the processed experimental result by using the matrix from BCS-100 and the result by using another matrix from a repositioning calibration system for the same balance TG618C is analyzed,and the validity of the calibration method expatiated in this paper can be confirmed.
  • Related Articles

    [1]KONG Xiaoping, CHEN Wei, LUO Shichao, LYU Minglei, QU Tao, WU Liyin. Study on calibration of effective test time in high enthalpy shock tunnel[J]. Journal of Experiments in Fluid Mechanics, 2025, 39(1): 1-7. DOI: 10.11729/syltlx20230087
    [2]YANG Yang, QIAN Fengxue, ZHANG Changfeng, LIU Zhiyong. Research on wind tunnel test technology of sonic boom measurement based on probe[J]. Journal of Experiments in Fluid Mechanics, 2023, 37(6): 92-100. DOI: 10.11729/syltlx20210193
    [3]CHEN Aiguo, TIAN Ying, WANG Jie, YANG Yanguang, LI Zhihui, LI Zhonghua, LI Zhenqian. Measurement investigation of rotational temperature and vibrational temperature in hypersonic wind tunnel rarefied flow field[J]. Journal of Experiments in Fluid Mechanics. DOI: 10.11729/syltlx20210192
    [4]LI Qiang, WAN Bingbing, ZHUANG Yu, ZHAO Jinshan. Experimental study on influence of incoming total temperature on hypersonic boundary layer transition[J]. Journal of Experiments in Fluid Mechanics. DOI: 10.11729/syltlx20220081
    [5]ZHANG Ying, LIU Nan. Numerical simulation and experimental test of unsteady flow field for oscillating vanes gust generator in high-speed wind tunnel[J]. Journal of Experiments in Fluid Mechanics, 2022, 36(5): 83-89. DOI: 10.11729/syltlx20210093
    [6]LAI Qingren, LIU Qinglin, GUO Long, ZHANG Pingtao, YI Xian. Icing and anti-icing test technology of aero-engine based on large-scale icing wind tunnel[J]. Journal of Experiments in Fluid Mechanics, 2021, 35(3): 1-8. DOI: 10.11729/syltlx20200067
    [7]CAI Ming, GAO Limin, LIU Zhe, LI Haoxue, CHEN Shun. Cascade testing for a subsonic compressor linear cascade and its modification[J]. Journal of Experiments in Fluid Mechanics, 2021, 35(2): 36-42. DOI: 10.11729/syltlx20200079
    [8]Fu Yang'aoxiao, Dong Weizhong, Ding Mingsong, Liu Qingzong, Gao Tiesuo, Jiang Tao. Numerical simulation of thermochemical non-equilibrium flow field in arc-jet tunnel[J]. Journal of Experiments in Fluid Mechanics, 2019, 33(3): 1-12. DOI: 10.11729/syltlx20180138
    [9]Luo Yue, Zhou Wei, Yang Hong, Chen Wei. CFD analysis of the arc heater turbulent flow field of flat plate testing[J]. Journal of Experiments in Fluid Mechanics, 2017, 31(2): 86-92. DOI: 10.11729/syltlx20160088
    [10]Wu Jinhua, Sun Haisheng, Shen Zhihong, Jiang Yubiao. 旋转流场下的振荡动导数试验技术研究[J]. Journal of Experiments in Fluid Mechanics, 2014, (4): 54-58. DOI: 10.11729/syltlx20130057
  • Cited by

    Periodical cited type(2)

    1. 雒卫廷. 大展弦比复合材料机翼结构细节抗疲劳优化. 兵器装备工程学报. 2020(03): 164-168 .
    2. 苗磊,李建强,李耀华,何成军,张诣,徐志伟. 风洞天平静态校准与使用状态一致性研究. 中国测试. 2020(08): 158-164 .

    Other cited types(0)

Catalog

    Article Metrics

    Article views (132) PDF downloads (3) Cited by(2)
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return
    x Close Forever Close