An ice wind tunnel test study on the scaling law of a rotating cone

ZHANG Lifen; GE Xin; ZHANG Fei; LIU Zhenxia; MA Dong; LYU Weijin

doi:10.11729/syltlx20200166

Volume 35 Issue 4

Aug. 2021

Turn off MathJax

Article Contents

Abstract

References

Journal of Experiments in Fluid Mechanics > 2021 > 35(4): 52-59. > DOI: 10.11729/syltlx20200166

ZHANG L F，GE X，ZHANG F，et al. An ice wind tunnel test study on the scaling law of a rotating cone[J]. Journal of Experiments in Fluid Mechanics, 2021，35（4）：52-59.. DOI: 10.11729/syltlx20200166

Citation:

PDF (5563 KB)

An ice wind tunnel test study on the scaling law of a rotating cone

1.
School of Power and Energy, Northwestern Polytechnical University, Xi’an　710072, China
2.
Key Laboratory of Icing and Anti/De-Icing, China Aerodynamics Research and Development Center, Mianyang Sichuan　621000, China

More Information

Received Date: December 27, 2020
Revised Date: February 24, 2021
Available Online: August 25, 2021

Graphical Abstract

Abstract

Abstract

In order to verify the scaling law of a rotating cone, a study on a rotating cone icing was carried out, and the icing scaling law of the rotating cone was derived. Taking a cone with a bottom diameter of 100 mm and cone angle of 80° as the full size model, and a cone with a bottom diameter of 50 mm and cone angle of 80° as the scaled model, the ice wind tunnel tests were carried out under different conditions. The ice shape on the surface of the cone was obtained by image method and processed in a dimensionless manner. Then the ice shape of the full size model was compared with that of the scaled model. The results show that, for glaze ice the ice shape of the front half of the cone on the full size and scaled models is in good agreement, but it is not in good agreement at the back half of the cone, and for rime ice the ice shape is in fairly good agreement on the full size and scaled models. The reasons are discussed, and suggestions are put forward for improvement.
- rotating cone,
- icing scaling law,
- ice wind tunnel,
- scaling

FullText(HTML)

References (30)

References

[1]	AL-KHALIL K, SALAMON L, TENISON G. Development of the cox icing research facility[C]//Proc of the 36th AIAA Aerospace Sciences Meeting and Exhibit. 1998. doi: 10.2514/6.1998-97
[2]	SOEDER R, SHELDON D, ANDRACCHIO C, et al. NASA Lewis icing research tunnel user manual[R]. NASA TM-107159, 1996.
[3]	HERMAN E. Goodrich icing wind tunnel overview, improvements and capabilities[R]. AIAA 2006-862, 2006. doi: 10.2514/6.2006-862
[4]	VECCHIONE L, De MATTEIS P. An overview of the CIRA icing wind tunnel[R]. AIAA 2003-900. doi: 10.2514/6.2003-900
[5]	祖孝勇,张林,肖斌,等. 3 m×2 m结冰风洞总压探针和皮托管研制[J]. 实验流体力学,2016,30(4):76-80. DOI: 10.11729/syltlx20160006 ZU X Y,ZHANG L,XIAO B,et al. Study and development of total pressure probe and pitot tube in 3 m×2 m icing wind tunnel[J]. Journal of Experiments in Fluid Mechanics,2016,30(4):76-80. doi: 10.11729/syltlx20160006
[6]	王宗衍. 冰风洞与结冰动力学[J]. 制冷学报,1999,20(4):15-17. WANG Z Y. Icing wind tunnel and icing aerodynamics[J]. Refrigeration Journal,1999,20(4):15-17.
[7]	RUFF G A. Analysis and verification of the icing scaling equations. volume 1[R]. Defense Technical Information Center, 1985. doi: 10.21236/ada162226
[8]	RUFF G. Verification and application of the icing scaling equations[R]. AIAA-86-0481, 1986. doi: 10.2514/6.1986-481
[9]	SAEED F,SELIG M S,BRAGG M B. Design of subscale airfoils with full-scale leading edges for ice accretion testing[J]. Journal of Aircraft,1997,34(1):94-100. doi: 10.2514/2.2140
[10]	SAEED F, SELIG M, BRAGG M, et al. Experimental validation of the hybrid airfoil design procedure for full-scale ice accretion simulation[C]//Proc of the 36th AIAA Aerospace Sciences Meeting and Exhibit. 1998. doi: 10.2514/6.1998-199
[11]	ANDERSON D. Rime-, mixed- and glaze-ice evaluations of three scaling laws[R]. AIAA 94-0718, 1994. doi: 10.2514/6.1994-718
[12]	ANDERSON D. Methods for scaling icing test conditions[R]. AIAA-95-0540, 1995. doi: 10.2514/6.1995-540
[13]	ANDERSON D. Further evaluation of traditional icing research tunnel validation studies[R]. AIAA 96-0633, 1996.
[14]	CANACCI V, GONSALEZ J, SPERA D, et al. Scale model Icing Research Tunnel validation studies[C]//Proc of the 36th AIAA Aerospace Sciences Meeting and Exhibit. 1998. doi: 10.2514/6.1998-706
[15]	ANDERSON D, RUFF G. Evaluation of methods to select scale velocity in icing scaling tests[R]. AIAA 99-0244, 1999. doi: 10.2514/6.1999-244
[16]	ANDERSON D N. Manual of Scaling Methods[R]. NASA/CR- 2004-212875, 2004.
[17]	易贤. 飞机积冰的数值计算与积冰试验相似准则研究[D]. 绵阳: 中国空气动力研究与发展中心, 2007.
[18]	周志宏,易贤,桂业伟,等. 考虑水滴动力学效应的结冰试验相似准则[J]. 实验流体力学,2016,30(2):20-25. DOI: 10.11729/syltlx20160013 ZHOU Z H,YI X,GUI Y W,et al. Icing scaling law with the dynamic effects of water droplets[J]. Journal of Experiments in Fluid Mechanics,2016,30(2):20-25. doi: 10.11729/syltlx20160013
[19]	易贤,周志宏,杜雁霞,等. 考虑相变时间效应的结冰试验相似参数[J]. 实验流体力学,2016,30(2):14-19. DOI: 10.11729/syltlx20160016 YI X,ZHOU Z H,DU Y X,et al. An icing scaling parameter with the effects of phase change time[J]. Journal of Experiments in Fluid Mechanics,2016,30(2):14-19. doi: 10.11729/syltlx20160016
[20]	LI L K, HU H. An experimental study of dynamic ice accretion process on aero-engine spinners[R]. AIAA 2017-0511, 2017. doi: 10.2514/6.2017-0551
[21]	王健,胡娅萍,吉洪湖,等. 旋转整流罩积冰生长与脱落过程的实验[J]. 航空动力学报,2014,29(6):1352-1357. DOI: 10.13224/j.cnki.jasp.2014.06.013 WANG J,HU Y P,JI H H,et al. Experiment of ice accrection and shedding on rotating spinner[J]. Journal of Aerospace Power,2014,29(6):1352-1357. doi: 10.13224/j.cnki.jasp.2014.06.013
[22]	CHEN N L,JI H H,HU Y P,et al. Experimental study of icing accretion on a rotating conical spinner[J]. Heat and Mass Transfer,2015,51(12):1717-1729. doi: 10.1007/s00231-015-1536-0
[23]	胡娅萍,吉洪湖,王健,等. 锥角对旋转整流罩积冰影响的模拟实验[J]. 航空动力学报,2014,29(3):495-503. DOI: 10.13224/j.cnki.jasp.2014.03.003 HU Y P,JI H H,WANG J,et al. Experiment on effect of cone angle on ice accretion of rotating spinner[J]. Journal of Aerospace Power,2014,29(3):495-503. doi: 10.13224/j.cnki.jasp.2014.03.003
[24]	MU Z D, SHEN X B, LIN G P, et al. Numerical simulation for ice accretion on rotating cowling considering water film shedding[R]. AIAA 2016-2187, 2016. doi: 10.2514/6.2016-2187
[25]	赵秋月,董威,朱剑鋆. 发动机旋转整流帽罩的水滴撞击特性分析[J]. 燃气涡轮试验与研究,2011,24(4):32-35. DOI: 10.3969/j.issn.1672-2620.2011.04.009 ZHAO Q Y,DONG W,ZHU J J. Droplets impinging characteristic analysis of the rotating fairing of aero-engine[J]. Gas Turbine Experiment and Research,2011,24(4):32-35. doi: 10.3969/j.issn.1672-2620.2011.04.009
[26]	吴孟龙,常士楠,冷梦尧,等. 基于欧拉法模拟旋转帽罩水滴撞击特性[J]. 北京航空航天大学学报,2014,40(9):1263-1267. DOI: 10.13700/j.bh.1001-5965.2013.0559 WU M L,CHANG S N,LENG M Y,et al. Simulation of droplet impingement characteristics of spinner based on Eulerian method[J]. Journal of Beijing University of Aeronautics and Astronautics,2014,40(9):1263-1267. doi: 10.13700/j.bh.1001-5965.2013.0559
[27]	ZHANG L F, ZHANG M H, LIU Z X. Collection efficiency of rotating spin in jet engine[C]//Proc of the 22nd International Symposium on Air Breathing Engines Conference. 2015.
[28]	ZHANG L F, ZHANG M H, ZHANG X X, et al. Modeling of ice accretion on rotating cone in aero-engine[R]. AIAA 2016-5059, 2016. doi: 10.2514/6.2016-5059
[29]	BRAGG M B. A similarity analysis of the droplet trajectory equation[J]. AIAA Journal,1982,20(12):1681-1686. doi: 10.2514/3.8004
[30]	张斐. 旋转帽罩结冰相似试验研究[D]. 西安: 西北工业大学学位论文, 2016.

Cited By

Cited by

Periodical cited type(1)

张怀宝，王靖宇，Bailey Sean C.C.，王光学，邓小刚. 低雷诺数壁面约束流动皮托管测速误差分析与校正. 国防科技大学学报. 2018(03): 37-41 .

Other cited types(0)

Get Citation

PDF

XML

Article Metrics

Article views (856) PDF downloads (39) Cited by(1)

An ice wind tunnel test study on the scaling law of a rotating cone

Abstract

References

Cited by

Periodical cited type(1)

Other cited types(0)

Catalog

Article Metrics

Related

An ice wind tunnel test study on the scaling law of a rotating cone

Abstract

References

Cited by

Periodical cited type(1)

Other cited types(0)

Catalog

Article Metrics

Related

Export File

Citation

Format

Content