WANG Xiangyi, ZHANG Lei, ZHANG Ruoling, JIANG Jin. Research on density variation and control method of high temperature fuel in combustor[J]. Journal of Experiments in Fluid Mechanics, 2021, 35(3): 83-87. DOI: 10.11729/syltlx20190162
Citation: WANG Xiangyi, ZHANG Lei, ZHANG Ruoling, JIANG Jin. Research on density variation and control method of high temperature fuel in combustor[J]. Journal of Experiments in Fluid Mechanics, 2021, 35(3): 83-87. DOI: 10.11729/syltlx20190162

Research on density variation and control method of high temperature fuel in combustor

More Information
  • Received Date: December 01, 2019
  • Revised Date: February 24, 2021
  • The operating characteristics of the high temperature fuel in the active cooling channel and the variation of the fuel density are analyzed. The design methods of the fuel temperature and pressure measurement system are given, and the control scheme of the injection pressure which can adapt to the great change of the fuel density is designed using the balance equations of fuel energy and entropy. In order to determine the influence of the fuel density change on the control scheme, the fuel injection pressure control tests are carried out on the directly connected combustion test platform. Both the fuel measurement and control systems work normally during the test, and the processes of the fuel injection pressure and the density variation agree well with the prediction, which verifies the effectiveness of the high temperature fuel measurement, control method and the fuel density calculation method.
  • [1]
    HEISER W, PRATT D, DALEY D, et al. Hypersonic airbreathing propulsion[M]. Washington, DC: AIAA, Inc., 1994. doi: 10.2514/4.470356
    [2]
    DRUMMOND J P, COCKRELL C E Jr, PELLETT G L, et al. Hypersonic airbreathing propulsion: an aerodynamics, aero-thermodynamics, and acoustics competency white paper[R]. NASA/TM-2002-211951.
    [3]
    MCCLINTON C R. High speed/hypersonic aircraft propulsion technology development[C]//Proc of the Advances on Propulsion Technology for High-Speed Aircraft. 2008.
    [4]
    HANK J, MURPHY J, MUTZMAN R. The X-51A scramjet engine flight demonstration program[C]//Proc of the 15th AIAA International Space Planes and Hypersonic Systems and Technologies Conference. 2008. doi: 10.2514/6.2008-2540
    [5]
    JACKSON T A, EKLUND D R, FINK A J. High speed propulsion: Performance advantage of advanced materials[J]. Journal of Materials Science, 2004, 39(19): 5905-5913. doi: 10.1023/B:JMSC.0000041687.37448.06
    [6]
    WISHART D, FORTIN T, DAN G N, et al. Design, fabrication and testing of an actively cooled scramjet propulsion system[C]//Proc of the 41st Aerospace Sciences Meeting and Exhibit. 2003. doi: 10.2514/6.2003-15
    [7]
    BOUDREAU A H. Status of the U.S. Air Force Hytech program[R]. AIAA-2003-6947, 2003.
    [8]
    张磊, 乐嘉陵, 张若凌, 等. 超临界压力下湍流区碳氢燃料传热研究[J]. 推进技术, 2013, 34(2): 225-229. DOI: 10.13675/j.cnki.tjjs.2013.02.024

    ZHANG L, LE J L, ZHANG R L, et al. Heat transfer of hydrocarbon fuel in turbulent flow region under supercritical pressure[J]. Journal of Propulsion Technology, 2013, 34(2): 225-229. doi: 10.13675/j.cnki.tjjs.2013.02.024
    [9]
    ZHANG L, ZHANG R L, XIAO S D, et al. Experimental investigation on heat transfer correlations of n-decane under supercritical pressure[J]. International Journal of Heat and Mass Transfer, 2013, 64: 393-400. doi: 10.1016/j.ijheatmasstransfer.2013.04.058
    [10]
    ZHAO G Z, SONG W Y, ZHANG R L. Effect of pressure on thermal cracking of China RP-3 aviation kerosene under supercritical conditions[J]. International Journal of Heat and Mass Transfer, 2015, 84: 625-632. doi: 10.1016/j.ijheatmasstransfer.2015.01.059
    [11]
    JIANG J, ZHANG R L, LE J L, et al. Regeneratively cooled scramjet heat transfer calculation and comparison with experimental data[J]. Journal of Aerospace Engineering, 2014, 228(8): 1227-1234. doi: 10.1177/0954410013488737
    [12]
    张华. 超燃冲压发动机燃料供应系统方案研究[D]. 长沙: 国防科学技术大学, 2011.

    ZHANG H. Investigation of hydrocarbon-fueled scramjet feed system scheme[D]. Changsha: National University of Defense Technology, 2011.
    [13]
    童秉纲, 孔祥言, 邓国华. 气体动力学[M]. 北京: 高等教育出版社, 1996.
  • Cited by

    Periodical cited type(2)

    1. 赖佑奎,马海腾,刘一粟,欧阳华. 基于磁共振测速的复合冷却涡轮叶片流动分析. 航空学报. 2023(14): 141-153 .
    2. 张科,段敬添,雷蒋,王子瑞,冀文涛,武俊梅. 基于MRV的菱形肋柱冷却通道三维全流场分析. 航空动力学报. 2023(12): 2837-2847 .

    Other cited types(1)

Catalog

    Article Metrics

    Article views (561) PDF downloads (22) Cited by(3)
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return
    x Close Forever Close