康含玉, 刘桂华, 王斌, 牛乾. 冰形表面激光光带中心线快速提取方法[J]. 实验流体力学, 2017, 31(5): 81-87. DOI: 10.11729/syltlx20170058
引用本文: 康含玉, 刘桂华, 王斌, 牛乾. 冰形表面激光光带中心线快速提取方法[J]. 实验流体力学, 2017, 31(5): 81-87. DOI: 10.11729/syltlx20170058
Kang Hanyu, Liu Guihua, Wang Bin, Niu Qian. A fast method of extracting the laser light bar's centerline in the ice model[J]. Journal of Experiments in Fluid Mechanics, 2017, 31(5): 81-87. DOI: 10.11729/syltlx20170058
Citation: Kang Hanyu, Liu Guihua, Wang Bin, Niu Qian. A fast method of extracting the laser light bar's centerline in the ice model[J]. Journal of Experiments in Fluid Mechanics, 2017, 31(5): 81-87. DOI: 10.11729/syltlx20170058

冰形表面激光光带中心线快速提取方法

A fast method of extracting the laser light bar's centerline in the ice model

  • 摘要: 在风洞结冰模型3D冰形测量中,激光三角测量法相对传统测量方法检测速度快、精确度高,具有极高研究价值。然而由于冰体对激光透射严重,影响激光中心线提取精度从而影响测量精度。针对此问题,提出一种冰形表面激光光带中心线快速提取方法。该算法具体实现步骤为:首先,采用基于三维块匹配去噪算法对图像进行降噪,并对图像进行视觉显著性计算,分割出光带区域;其次,求取梯度图并转换至频域空间,根据图像频谱特征求取能量中心区域;最后,对区域采用灰度重心法求取中心线亚像素级位置。采用冰箱冻结的半径已知圆柱冰块评估该算法,测得算法处理时效为28.57FPS,使用该算法的冰形轮廓重建精度达到0.017mm。实验证明算法满足冰形在线测量技术要求,为开展结冰实验中结冰生长过程在线三维检测技术奠定技术基础。

     

    Abstract: The laser centerline extraction is an important step in the measurement of the ice cross sectional profile, and the extraction accuracy directly affects the accuracy of the measurement system. Especially the ice on the structural light transmission is serious, the center line extraction algorithm is put forward a higher requirement. A fast centerline extraction method based on frequency domain transform is proposed to extract the center line in the three-dimensional measurement of ice. First, the image is subjected to noise reduction based on the technique of Block-matching and 3D filtering. Second, in order to reduce the computational complexity, the visual significance of the image is calculated by using the quaternion Fourier transform of phase spectrum, and then extract the optical band's region. Third, obtain the gradient map and convert to the frequency domain space, according to the image spectrum characteristics, we can obtain the center line position. The experimental results show that the algorithm is 28.57FPS, and the accuracy of ice contour reconstruction is 0.017mm.

     

/

返回文章
返回