Research on test technology of civil aero-engine combustor

MENG Gang; HE Min; ZHANG Jingwei; CHEN Zhilong; QIN Hao; ZHENG Dan

doi:10.11729/syltlx20210177

Volume 36 Issue 5

Oct. 2022

Turn off MathJax

Article Contents

Article Navigation > Journal of Experiments in Fluid Mechanics > 2022 > 36(5): 34-42

MENG G，HE M，ZHANG J W，et al. Research on test technology of civil aero-engine combustor[J]. Journal of Experiments in Fluid Mechanics, 2022，36（5）：34-42. doi: 10.11729/syltlx20210177

Citation:

MENG G，HE M，ZHANG J W，et al. Research on test technology of civil aero-engine combustor[J]. Journal of Experiments in Fluid Mechanics, 2022，36（5）：34-42. doi: 10.11729/syltlx20210177

Citation:

MENG G，HE M，ZHANG J W，et al. Research on test technology of civil aero-engine combustor[J]. Journal of Experiments in Fluid Mechanics, 2022，36（5）：34-42. doi: 10.11729/syltlx20210177

PDF( 7476 KB)

Research on test technology of civil aero-engine combustor

doi: 10.11729/syltlx20210177

AECC Commercial Aircraft Engine CO., LTD, Shanghai　200241, China

Received Date: 2021-12-13
Accepted Date: 2022-03-01
Rev Recd Date: 2022-02-21
Publish Date: 2022-10-01

Abstract

Abstract

In recent years, the engines for large commercial airplane are being developed closely, and the tests for main components and the whole engine are being conducted massively in China. For the purpose of supporting the development of low-emission combustors, the paper introduces the typical R&D path of a civil engine combustor, and mainly focuses on the test technologies of single cup, multiple cups and full annular combustors, in which the main test subjects, test process, instrumentation, key points and common issues have been summarized. At the same time, by making a comparison of test pressure/temperature, instrumentation, test abundance and perspectiveness between China and western countries and by summarizing of Chinese civil combustor test technology developments, the paper gives reference to the domestic researchers in the fields of low-emission combustor research, test facility construction, measure-ment enhancement and gap filling.
- civil aviation,
- aero-engine,
- combustor,
- low-emission,
- test technology

FullText(HTML)

References(33)

References

[1]	陈光. 航空发动机结构设计分析[M]. 北京: 北京航空航天大学出版社, 2006.
[2]	金捷, 岳明. 燃气涡轮发动机低污染燃烧室的发展趋势及思考[C]//中国航空学会2007年学术年会议论文集. 2007.
[3]	赵坚行. 民用发动机污染排放及低污染燃烧技术发展趋势[J]. 航空动力学报,2008,23(6):986-996. ZHAO J X. Pollutant emission and development of low-emission combustion technology for civil aero engine[J]. Journal of Aerospace Power,2008,23(6):986-996.
[4]	张宝诚. 航空发动机燃烧室的现状和发展[J]. 航空发动机,2013,39(6):67-73. doi: 10.3969/j.issn.1672-3147.2013.06.013 ZHANG B C. Status and development of aeroengine com-bustors[J]. Aeroengine,2013,39(6):67-73. doi: 10.3969/j.issn.1672-3147.2013.06.013
[5]	张弛,林宇震,徐华胜,等. 民用航空发动机低排放燃烧室技术发展现状及水平[J]. 航空学报,2014,35(2):332-350. ZHANG C,LIN Y Z,XU H S,et al. Development status and level of low emissions combustor technologies for civil aero-engine[J]. Acta Aeronautica et Astronautica Sinica,2014,35(2):332-350.
[6]	航空航天工业部高效节能发动机文集编委会. 高效节能发动机文集（第4分册）: 燃烧室设计与试验[M]. 北京: 航空工业出版社, 1991.
[7]	尉曙明. 先进燃气轮机燃烧室设计研发[M]. 上海: 上海交通大学出版社, 2014. YU S M. Advanced gas turbine combustor design and development[M]. Shanghai: Shanghai Jiao Tong University Press, 2014.
[8]	FOUST M, THOMSEN D, STICKLES R, et al. Develop-ment of the GE aviation low emissions TAPS combustor for next generation aircraft engines[C]//Proc of the 50th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition. 2012. doi: 10.2514/6.2012-936
[9]	LAZIK W, DOERR T, BAKE S, et al. Development of lean-burn low-NO_x combustion technology at rolls-Royce Deutsch-land[C]//Proceedings of ASME Turbo Expo 2008: Power for Land, Sea, and Air. 2009: 797-807. doi: 10.1115/GT2008-51115
[10]	张川,索建秦,金如山. 民用飞机低污染燃烧室的技术成熟度划分[J]. 航空工程进展,2010,1(1):85-89. doi: 10.3969/j.issn.1674-8190.2010.01.018 ZHANG C,SUO J Q,JIN R S. Technology readiness level scale for low emission combustor of civil aircraft[J]. Advances in Aeronautical Science and Engineering,2010,1(1):85-89. doi: 10.3969/j.issn.1674-8190.2010.01.018
[11]	王明瑞,王振华,韩冰,等. 航空发动机主燃烧室高温测试技术[J]. 航空发动机,2016,42(5):87-93. WANG M R,WANG Z H,HAN B,et al. High temperature measurement technology for main combustion chamber of aeroengine[J]. Aeroengine,2016,42(5):87-93.
[12]	REDDY D R, LEE C M. An overview of low-emission combustion research at NASA Glenn[C]//Proceedings of ASME Turbo Expo 2016: Turbomachinery Technical Con-ference and Exposition. 2016. doi: 10.1115/GT2016-56100
[13]	林宇震, 许全宏, 刘高恩. 燃气轮机燃烧室[M]. 北京: 国防工业出版社, 2008. LIN Y Z, XU Q H, LIU G E. Cas turbine combustor[M]. Beijing: National Defense Industry Press, 2008.
[14]	MEIER U, FREITAG S, HEINZE J, et al. Characterization of lean burn module air blast pilot injector with laser techniques[C]//Proceedings of ASME Turbo Expo 2013: Turbine Technical Conference and Exposition. 2013. doi: 10.1115/GT2013-94796
[15]	FYFFE D, MORAN J, KANNAIYAN K, et al. Effect of GTL-like jet fuel composition on GT engine altitude ignition performance: part I—combustor operability[C]//Proceedings of ASME 2011 Turbo Expo: Turbine Technical Conference and Exposition. 2012: 485-494. doi: 10.1115/GT2011-45487
[16]	《航空发动机设计手册》总编委会. 航空发动机设计手册, 第9册, 主燃烧室[M]. 北京: 航空工业出版社, 2000.
[17]	YAMAMOTO T, SHIMODAIRA K, KUROSAWA Y, et al. Investigations of a staged fuel nozzle for aeroengines by multi-sector combustor test[C]//Proceedings of ASME Turbo Expo 2010: Power for Land, Sea, and Air. 2010: 961-973. doi: 10.1115/GT2010-23206
[18]	ADAM P W, NORRIS J W. Advanced jet engine combustor test facility[R]. NASA TN D-6030, 1970.
[19]	张宝诚. 航空发动机试验和测试技术[M]. 北京: 北京航空航天大学出版社, 2005.
[20]	MAKIDA M, YAMADA H, SHIMODAIRA K, et al. Verifi-cation of low NO_x performance of simple primary rich combustion approach by a newly established full annular combustor test facility[C]//Proceedings of ASME Turbo Expo 2008: Power for Land, Sea, and Air. 2009: 1105-1113. doi: 10.1115/GT2008-51419
[21]	PLANA V, VAUTHIER J S, CASTELOOT C. Design and optimization of a high temperature water cooled probe for gas analysis measurement on K11 combustion test rig[C]//Proceedings of ASME 2011 Turbo Expo: Turbine Technical Conference and Expositio. 2012: 29-38. doi: 10.1115/GT2011-45177
[22]	JIANG L Y, MANIPURATH S, BOURQUE G, et al. Flow-field investigation of two gas-sampling probes[C]//Proc of the Volume 1: Combustion and Fuels. 2006. doi: 10.1115/gt2006-90239
[23]	PENKO P F, FRASER B, ADKINS S E, et al. The high-pressure combustion facility at the NASA Glenn research center[C]//Proceedings of ASME Turbo Expo 2003, Collo-cated With the 2003 International Joint Power Generation Conference. 2009: 151-157. doi: 10.1115/GT2003-38013
[24]	DUBIEL D. Energy efficient engine combustor component performance program[R]. NASA CR-179533, 1986.
[25]	RUMIZEN M. ASTM D4054 Users' Guide[Z]. CAAFI Cer-tification-Qualification Team. 2013.
[26]	DOLL U,DUES M,BACCI T,et al. Aero-thermal flow characterization downstream of an NGV cascade by five-hole probe and filtered Rayleigh scattering measurements[J]. Experiments in Fluids,2018,59(10):1-10. doi: 10.1007/s00348-018-2607-z
[27]	EN'URGA INC. Setscan patternator[EB/OL]. [2021-12-13]. http://www.enurga.com.
[28]	PLANA V, HERVY F, SERRE J. Taking-off under tropical storm: a new steam and water injection feature in the K9 combustion test rig of DGA aero-engine testing[C]//Procee-dings of ASME 2011 Turbo Expo: Turbine Technical Con-ference and Exposition. 2012: 195-202. doi: 10.1115/GT2011-45178
[29]	MOSBACH T, SADANANDAN R, MEIER W, et al. Experimental analysis of altitude relight under realistic conditions using laser and high-speed video techniques[C]//Proceedings of ASME Turbo Expo 2010: Power for Land, Sea, and Air. 2010: 523-532. doi: 10.1115/GT2010-22625
[30]	MANIPURATH S S. Experimental study of superheated kerosene jet fuel sprays from a pressure-swirl nozzle[C]//Proceedings of ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition. 2017. doi: 10.1115/GT2017-64846
[31]	JEAN J, FOSSI A, DE CHAMPLAIN A, et al. Assessment of biofuels/jet A-1 blends to meet cold start and altitude relight requirements[C]//Proc of the Volume 4B: Combustion, Fuels and Emissions. 2017. doi: 10.1115/gt2017-64905
[32]	杨文,张冬梅,曹文杰,等. 煤基喷气燃料在地面单管燃烧室内燃烧和排放特性研究[J]. 航空动力学报,2016,31(8):1874-1882. YANG W,ZHANG D M,CAO W J,et al. Studies on combustion and emission characteristics of coal-based jet fuel in ground individual can combustor[J]. Journal of Aerospace Power,2016,31(8):1874-1882.
[33]	刘金林,马小森,赵鹏,等. 煤基合成油燃烧性能试验研究[J]. 航空发动机,2018,44(4):76-79. LIU J L,MA X S,ZHAO P,et al. Experimental study on combustion characteristics of coal-based synthetic oil[J]. Aeroengine,2018,44(4):76-79.