Ejector system design and performance test of <i>Φ</i>1.2 m hypersonic wind tunnel

MA Lichuan; WANG Tiejin; CUI Chun; HUANG Jingbo; SUN Yongtang; HUANG Bingxiu; SHI Yunjun

doi:10.11729/syltlx20210139

Volume 36 Issue 5

Oct. 2022

Turn off MathJax

Article Contents

Article Navigation > Journal of Experiments in Fluid Mechanics > 2022 > 36(5): 1-7

MA L C，WANG T J，CUI C，et al. Ejector system design and performance test of Φ1.2 m hypersonic wind tunnel[J]. Journal of Experiments in Fluid Mechanics, 2022，36（5）：1-7. doi: 10.11729/syltlx20210139

Citation:

PDF( 9888 KB)

Ejector system design and performance test of Φ1.2 m hypersonic wind tunnel

doi: 10.11729/syltlx20210139

China Academy of Aerospace Aerodynamics, Beijing　100074, China

Received Date: 2021-11-16
Accepted Date: 2022-05-10
Rev Recd Date: 2022-03-23
Publish Date: 2022-10-01

Abstract

Abstract

Aiming at the problems such as high pressurization ratio, wide suction range and multi-stage parameter matching in large hypersonic wind tunnel, this paper carried out the design calculation and suction test of the multi-stage ejector system in Φ1.2 m hypersonic wind tunnel. Through single stage performance debugging and multistage combination performance debugging of the first, second and third stage ejector without wind tunnel main flow, the suction performance of three stage multi nozzle central ejector with different working parameters is obtained. The minimum static pressure in the test section is 660 Pa without the main flow. And the parameter matching principle of efficient operation of the multi-stage ejector is analyzed and summarized. The test results of the ejector coefficient with the main airflow in the wind tunnel are in good agreement with the theoretical calculation values, which verifies the feasibility of the aerodynamic design method for the multistage multi-nozzle ejector. The design results are reliable, which can provide technical reference for the design of the multistage ejector system in the hypersonic wind tunnel or other ground aerodynamic test equipment.
- hypersonic wind tunnel,
- multi-stage ejector,
- multi-nozzles,
- performance test

FullText(HTML)

References(15)

References

[1]	许晓斌. 常规高超声速风洞与试验技术[M]. 北京: 国防工业出版社, 2015.
[2]	郭孝国,江泽鹏,陈星,等. 高超声速风洞两级引射器气动性能试验研究[J]. 实验流体力学,2018,32(4):99-103. doi: 10.11729/syltlx20170041 GUO X G,JIANG Z P,CHEN X,et al. Experimental investigation on aerodynamic performance of hypersonic wind tunnel two-stage ejector[J]. Journal of Experiments in Fluid Mechanics,2018,32(4):99-103. doi: 10.11729/syltlx20170041
[3]	中国人民解放军总装备部军事训练教材编辑工作委员会. 高低速风洞气动与结构设计[M]. 北京: 国防工业出版社, 2003.
[4]	廖达雄. 气体引射器原理及设计[M]. 北京: 国防工业出版社, 2018.
[5]	战培国. 俄罗斯TsAGI风洞试验设备概览[M]. 北京: 国防工业出版社, 2018. ZHAN P G. Overview of the Russian TsAGI's wind tunnel test facilities[M]. Beijing: National Defense Industry Press, 2018.
[6]	刘志勇. FL-31风洞三级引射器系统抽真空能力数值研究[J]. 气动研究与发展,2012,22(2). LIU Z Y. Numerical simulation on vacuum ability of the three-stage ejector system in FL-31 wind tunnel[J]. Aerodynamics Research and Development,2012,22(2).
[7]	孙勇堂, 赵之平, 石运军, 等. CAAA新建Φ1.2 米常规高超声速风洞[C]//中国力学大会—2017暨庆祝中国力学学会成立60周年大会论文集, 2017: 1467-1474.
[8]	任泽斌,廖达雄,张国彪. 2 m×2 m超声速风洞引射器气动设计[J]. 航空动力学报,2014,29(10):2288-2293. doi: 10.13224/j.cnki.jasp.2014.10.003 REN Z B,LIAO D X,ZHANG G B. Aerodynamic design of the ejector of 2 m × 2 m supersonic wind tunnel[J]. Journal of Aerospace Power,2014,29(10):2288-2293. doi: 10.13224/j.cnki.jasp.2014.10.003
[9]	王铁进. 用于高超音速风洞中的多喷管中心引射器的性能研究[D]. 北京: 北京空气动力研究所, 1995.
[10]	王锁芳,李立国. 多喷管引射器的性能分析[J]. 南京航空航天大学学报,1996,28(3):350-356. WANG S F,LI L G. Performance analysis of a multi nozzle ejector[J]. Transactions of Nanjing University of Aeronau-tics & Astronautics,1996,28(3):350-356.
[11]	邹建军,周进,徐万武,等. 超音速环形引射器空气引射启动特性试验[J]. 国防科技大学学报,2008,30(1):1-4. doi: 10.3969/j.issn.1001-2486.2008.01.001 ZOU J J,ZHOU J,XU W W,et al. Experimental investigation on the start performances of the supersonic annular air ejector[J]. Journal of National University of Defense Technology,2008,30(1):1-4. doi: 10.3969/j.issn.1001-2486.2008.01.001
[12]	缪亚芹,王锁芳,吴恒刚. 多喷管引射器试验研究与数值模拟[J]. 南京师范大学学报(工程技术版),2006,6(2):68-71. MIAO Y Q,WANG S F,WU H G. Experimental investigation and numerical simulation about the multi-nozzle ejector[J]. Journal of Nanjing Normal University (Engineering and Technology),2006,6(2):68-71.
[13]	吴继平. 高增压比多喷管超声速引射器设计理论、方法与实验研究[D]. 长沙: 国防科学技术大学, 2007. WU J P. Design theory, method and experimental investigation of high compression ratio multi-nozzle supersonic ejector[D]. Changsha: National University of Defense Technology, 2007.
[14]	欧朝. 超声速引射器型面优化设计与试验研究[D]. 长沙: 国防科学技术大学, 2012. OU C. Profile optimization design and experimental study of supersonic ejector[D]. Changsha: National University of Defense Technology, 2012.
[15]	凌其扬,廖达雄,陶祖贤. 风洞引射器试验研究[J]. 气动实验与测量控制,1994,8(2):10-18. LING Q Y,LIAO D X,TAO Z X. Experimental research of wind tunnel injector[J]. Aerodynamic Experiment and Measurement & Control,1994,8(2):10-18.