Optimization analysis of modified axial force element of sting balance

MIN Fu; XIE Zhendong; DAI Jinwen; PI Xingcai; YANG Yanguang

doi:10.11729/syltlx20210083

Volume 36 Issue 5

Oct. 2022

Turn off MathJax

Article Contents

Article Navigation > Journal of Experiments in Fluid Mechanics > 2022 > 36(5): 76-82

MIN F，XIE Z D，DAI J W，et al. Optimization analysis of modified axial force element of sting balance[J]. Journal of Experiments in Fluid Mechanics, 2022，36（5）：76-82. doi: 10.11729/syltlx20210083

Citation:

PDF( 6431 KB)

Optimization analysis of modified axial force element of sting balance

doi: 10.11729/syltlx20210083

1.
Hypervelocity Aerodynamics Institute of China Aerodynamics Research and Development Center, Mianyang　621000, China
2.
China Aerodynamics Research and Development Center, Mianyang　621000, China

Received Date: 2021-08-04
Accepted Date: 2021-08-31
Rev Recd Date: 2021-08-27

Available Online: 2022-01-10

Publish Date: 2022-10-01

Abstract

Abstract

Aiming at the problem that the measuring of axial force is greatly disturbed by the normal force, a modified axial force element of sting balance is proposed. By means of theoretical analysis and finite element simulation, the deformation of axial force element under axial force and normal force is obtained. Meanwhile, mechanical analysis has been carried out to get the characteristics and reasons of the deformation of the measuring beam under normal force. The deflection angle between measuring beams and main beams of the modified structure is specific, and it is not 90°, which is obtained by linear fitting between the ratio of the interference of normal force on axial force to the output of axial force and the deflection angle. Simulation result of the modified structure shows that the axial force output is only reduced by 2.77%, moreover, the interference of normal force is reduced by 99.32%, compared to the conventional axial force element. The modified axial force element can obviously reduce normal force interference on normal force, so it can be used for wind tunnel aerodynamic test with large lift-to-drag ratio requirement.
- sting balance,
- axial force element,
- normal force interference,
- measuring beam,
- linear fitting

FullText(HTML)

References(13)

References

[1]	贺徳馨. 风洞天平[M]. 北京: 国防工业出版社, 2001年.
[2]	NOURI N M,MOSTAFAPOUR K,KAMRAN M,et al. Design methodology of a six-component balance for measuring forces and moments in water tunnel tests[J]. Measurement,2014,58:544-555. doi: 10.1016/j.measurement.2014.09.011
[3]	RINGEL M,LEVIN D. Improved drag element for wind tunnel sting balances[J]. Journal of Aircraft,1985,22(11):979-982. doi: 10.2514/3.45234
[4]	ZHANG S X,LI X,MA H Q,et al. Mechanical analysis of normal force interference on axial force measurement for internal sting balance[J]. Aerospace Science and Technology,2016,58:351-357. doi: 10.1016/j.ast.2016.08.028
[5]	陆文祥,彭超. 高精度大升阻比民机测力天平研制[J]. 流体力学实验与测量,1999,13(3):75-79,96. LU W X,PENG C. Development of the force measuring balances for civil planes with high accuracy and lift drag ratio[J]. Experiments and Measurements in Fluid Mechanics,1999,13(3):75-79,96.
[6]	史玉杰,黄勇,田正波. 小展弦比飞翼布局高速标模测力天平研制[J]. 实验流体力学,2015,29(5):50-54. doi: 10.11729/syltlx20150015 SHI Y J,HUANG Y,TIAN Z B. Strain gauge balance development for force test on small aspect ratio flying wing high speed standard model[J]. Journal of Experiments in Fluid Mechanics,2015,29(5):50-54. doi: 10.11729/syltlx20150015
[7]	史玉杰,陈竹,田正波. 横Π型梁在风洞应变天平阻力结构上的应用[J]. 实验流体力学,2012,26(4):83-86. doi: 10.3969/j.issn.1672-9897.2012.04.017 SHI Y J,CHEN Z,TIAN Z B. The application of thwart Π beam to axial force structure of wind tunnel strain gauge balance[J]. Journal of Experiments in Fluid Mechanics,2012,26(4):83-86. doi: 10.3969/j.issn.1672-9897.2012.04.017
[8]	熊琳,宫建,王金印,等. 小直径杆式应变天平轴向力元件设计问题的探讨[J]. 实验流体力学,2013,27(5):75-78. doi: 10.3969/j.issn.1672-9897.2013.05.014 XIONG L,GONG J,WANG J Y,et al. Discussion about axial force element design of bending-beam strain-gauge balance with small diameter[J]. Journal of Experiments in Fluid Mechanics,2013,27(5):75-78. doi: 10.3969/j.issn.1672-9897.2013.05.014
[9]	闫万方,蒋坤,张江. 基于减小轴向力测量干扰的高精度测力天平研制[J]. 实验流体力学,2018,32(6):61-67. doi: 10.11729/syltlx20180082 YAN W F,JIANG K,ZHANG J. Development of a six-component wind tunnel balance with lower interference on axial force measurement[J]. Journal of Experiments in Fluid Mechanics,2018,32(6):61-67. doi: 10.11729/syltlx20180082
[10]	顾岩,虞伟建. 有限元分析法在风洞天平中的应用[J]. 流体力学实验与测量,1999,13(4):82-86. GU Y,YU W J. The application of finite element analysis in wind-tunnel balance[J]. Experiments and Measurements in Fluid Mechanics,1999,13(4):82-86.
[11]	姚裕,张召明. 整体式盒式应变天平有限元设计[J]. 南京航空航天大学学报,2010,42(1):58-61. doi: 10.3969/j.issn.1005-2615.2010.01.011 YAO Y,ZHANG Z M. Finite element design on integrated box balance[J]. Journal of Nanjing University of Aeronautics & Astronautics,2010,42(1):58-61. doi: 10.3969/j.issn.1005-2615.2010.01.011
[12]	PARKER P, DELOACH R. Structural optimization of a force balance using a computational experiment design[R]. AIAA-2002-0540, 2002. doi: 10.2514/6.2002-540
[13]	RHEW R. Strain-gage balance axial section design optimiza-tion using design of experiments[R]. AIAA 2005-7600, 2005. doi: 10.2514/6.2005-7600