[1] |
HEISER W, PRATT D, DALEY D, et al. Hypersonic airbreathing propulsion[M]. Washington, DC: AIAA, Inc., 1994. doi:10. 2514/4. 470356
|
[2] |
涂建强, 陈连忠, 马雪松, 等. 发动机燃烧室热防护系统电弧加热直连式试验技术[J]. 导弹与航天运载技术, 2013(6): 10-14. doi: 10.7654/j.issn.1004-7182.20130603TU J Q, CHEN L Z, MA X S, et al. Arc-heated direct-connected testing technology investigation on scramjet combustor thermal protection system[J]. Missiles and Space Vehicles, 2013(6): 10-14. doi: 10.7654/j.issn.1004-7182.20130603
|
[3] |
杨庆涛, 赵顺洪, 周玮, 等. 超燃冲压发动机模型热结构变形量非接触测量研究[J]. 战术导弹技术, 2016(2): 52-56. doi: 10.16358/j.issn.1009-1300.2016.02.10YANG Q T, ZHAO S H, ZHOU W, et al. Study of hot structure deformation non-contact measurement of scramjet article[J]. Tactical Missile Technology, 2016(2): 52-56. doi: 10.16358/j.issn.1009-1300.2016.02.10
|
[4] |
申秀丽, 薛园园, 胡延青, 等. 涡轮复杂气冷叶盘结构变形分析模型简化方法[J]. 航空动力学报, 2017, 32(7): 1712-1717. doi: 10.13224/j.cnki.jasp.2017.07.023SHEN X L, XUE Y Y, HU Y Q, et al. Simplification method of complex air cooling bladed disk structure's deformation analysis model[J]. Journal of Aerospace Power, 2017, 32(7): 1712-1717. doi: 10.13224/j.cnki.jasp.2017.07.023
|
[5] |
任志敏, 骆家文, 李春光, 等. 冲压发动机燃烧室壳体静热试验局部失稳变形分析[J]. 推进技术, 2011, 32(5): 717-721. doi: 10.13675/j.cnki.tjjs.2011.05.023REN Z M, LUO J W, LI C G, et al. Analysis of local buckling distortion and deformation of a ramjet combustor shell in a structural and thermal experiment[J]. Journal of Propulsion Technology, 2011, 32(5): 717-721. doi: 10.13675/j.cnki.tjjs.2011.05.023
|
[6] |
赵丽娜, 贺平照, 邢树根, 等. 基于数字散斑技术的炭/炭复合材料高温应变测量[J]. 固体火箭技术, 2014, 37(5): 729-733. doi: 10.7673/j.issn.1006-2793.2014.05.027ZHAO L N, HE P Z, XING S G, et al. Strain measurement of carbon/carbon composites at high temperatures by digital speckle correlation method[J]. Journal of Solid Rocket Technology, 2014, 37(5): 729-733. doi: 10.7673/j.issn.1006-2793.2014.05.027
|
[7] |
汪贤聪, 杜咏, 周浩. 火灾高温下材料力学性能测试技术试验研究[J]. 建筑钢结构进展, 2018, 20(6): 39-45, 56. doi: 10.13969/j.cnki.cn31-1893.2018.06.006WANG X C, DU Y, ZHOU H. Experimental study on the measuring technology of mechanical properties of materials at elevated temperatures[J]. Progress in Steel Building Struc-tures, 2018, 20(6): 39-45, 56. doi: 10.13969/j.cnki.cn31-1893.2018.06.006
|
[8] |
潘兵, 吴大方, 谢惠民, 等. 基于梯度的数字体图像相关方法测量物体内部变形[J]. 光学学报, 2011, 31(6): 0612005. doi: 10.3788/AOS201131.0612005PAN B, WU D F, XIE H M, et al. Spatial-gradient-based digital volume correlation technique for internal deformation measurement[J]. Acta Optica Sinica, 2011, 31(6): 0612005. doi: 10.3788/AOS201131.0612005
|
[9] |
刘禹, 肖世德, 张睿, 等. 基于遗传算法的数字图像相关变形初值估计[J]. 激光技术, 2020, 44(1): 130-135. doi: 10.7510/jgjs.issn.1001-3806.2020.01.023LIU Y, XIAO S D, ZHANG R, et al. Initial estimation of digital image correlated deformation based on genetic algorithms[J]. Laser Technology, 2020, 44(1): 130-135. doi: 10.7510/jgjs.issn.1001-3806.2020.01.023
|
[10] |
魏斌, 梁晋, 李洁, 等. 大型上单翼飞机机翼三维全场变形测量方案[J]. 航空学报, 2017, 38(7): 167-176. doi: 10.7527/S1000-6893.2016.120859WEI B, LIANG J, LI J, et al. 3D full-field wing deformation measurement method for large high-wing airplanes[J]. Acta Aeronautica et Astronautica Sinica, 2017, 38(7): 167-176. doi: 10.7527/S1000-6893.2016.120859
|
[11] |
王立忠, 汪耀, 梁晋, 等. 高速三维数字图像法测量手机跌落全场应变[J]. 光学精密工程, 2018, 26(9): 2174-2180. doi: 10.3788/OPE.20182609.2174WANG L Z, WANG Y, LIANG J, et al. Measurement of full-field strain incell phone dropping test by high-speed 3D digital image correlation method[J]. Optics and Precision Engineering, 2018, 26(9): 2174-2180. doi: 10.3788/OPE.20182609.2174
|
[12] |
潘兵, 谢惠民, 夏勇, 等. 数字图像相关中基于可靠变形初值估计的大变形测量[J]. 光学学报, 2009, 29(2): 400-406. doi: 10.3788/AOS20092902.0400PAN B, XIE H M, XIA Y, et al. Large-deformation measurement based on reliable initial guess in digital image correlation method[J]. Acta Optica Sinica, 2009, 29(2): 400-406. doi: 10.3788/AOS20092902.0400
|
[13] |
杨红梅, 刘志刚. 基于SURF特征匹配的电气化铁路接触网支撑装置旋转双耳不良状态检测[J]. 铁道学报, 2016, 38(8): 28-34. doi: 10.3969/j.issn.1001-8360.2016.08.005YANG H M, LIU Z G. Defective condition detection of rotary double ears of catenary support device of electrified railway based on feature matching of SURF[J]. Journal of the China Railway Society, 2016, 38(8): 28-34. doi: 10.3969/j.issn.1001-8360.2016.08.005
|
[14] |
张志斌, 赵帅领, 罗锡文, 等. 基于SURF算法的绿色作物特征提取与图像匹配方法[J]. 农业工程学报, 2015, 31(14): 172-178. doi: 10.11975/j.issn.1002-6819.2015.14.024ZHANG Z B, ZHAO S L, LUO X W, et al. Matching method of green crops based on SURF feature extraction[J]. Transactions of the Chinese Society of Agricultural Engineer-ing, 2015, 31(14): 172-178. doi: 10.11975/j.issn.1002-6819.2015.14.024
|
[15] |
朱奇光, 王佳, 张朋珍, 等. 基于高斯矩改进SURF算法的移动机器人定位研究[J]. 仪器仪表学报, 2015, 36(11): 2451-2457. doi: 10.19650/j.cnki.cjsi.2015.11.007ZHU Q G, WANG J, ZHANG P Z, et al. Research on mobile robot localization based on Gaussian moment improved SURF algorithm[J]. Chinese Journal of Scientific Instrument, 2015, 36(11): 2451-2457. doi: 10.19650/j.cnki.cjsi.2015.11.007
|
[16] |
BAY H, ESS A, TUYTELAARS T, et al. Speeded-up robust features (SURF)[J]. Computer Vision and Image Understand-ing, 2008, 110(3): 346-359. doi: 10.1016/j.cviu.2007.09.014
|
[17] |
PAN B, WANG Z Y, LU Z X. Genuine full-field deformation measurement of an object with complex shape using reliability-guided digital image correlation[J]. Optics Express, 2010, 18(2): 1011-1023. doi: 10.1364/oe.18.001011
|
[18] |
ZHOU Y H, CHEN Y Q. Feature matching for automated and reliable initialization in three-dimensional digital image correlation[J]. Optics and Lasers in Engineering, 2013, 51(3): 213-223. doi: 10.1016/j.optlaseng.2012.10.011
|
[19] |
TONG W. An evaluation of digital image correlation criteria for strain mapping applications[J]. Strain, 2005, 41(4): 167-175. doi: 10.1111/j.1475-1305.2005.00227.x
|
[20] |
BAY H, TUYTELAARS T, VAN GOOL L. SURF: speeded up robust features[C]//Proc of the 9th European Conference on Computer Vision. 2006. doi: https://doi.org/10.1007/11744023_32
|
[21] |
BROWN M, LOWE D G. Invariant features from interest point groups[C]//Procedings of the British Machine Vision Conference. 2002. doi: 10.5244/c.16.23
|