[1] |
Leong M Y, McDonell V C. Mixing of an irblast atomized fuel spray injected into a crossflow of air[R]. NASA/CR-2000-210467.
|
[2] |
Jun C, Jeng S M. The structure of a swirl-stabilized reacting spray issued from an axial swirler[C]. 43rd AIAA Aerospace Sciences Meeting & Exhibit 10-13 January 2005/Reno, Nevada.
|
[3] |
Batarseh F Z M. Spray generated by an airblast atomizer: atomization, propagation and aerodynamic instability[D]. Darmstadt: Technische Universitat Darmstadt, Doktor-Ingenieurs, 2008.
|
[4] |
Zhang Z. Experimental study on fuel spray characteristics in model combustor[D]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2009.
|
[5] |
Xu R, Zhao J X, Yan Y W. Fuel spray characteristic of TAPS/MLDI low emission combustor[J]. Journal of Aerospace Power, 2012, 27(11):2421-2428. http://en.cnki.com.cn/Article_en/CJFDTotal-HKDI201211005.htm
|
[6] |
Deng Y H, Zhu J W, Yan Y W. Cold flow field and fuel spray charactersitic of LPP low emission combustor[J]. Journal of Nanjing University of Aeronautics & Astronautics, 2013, 45(2):162-169.
|
[7] |
Jaegle F, Senoner J M. Eulerian and Lagrangian spray simulations of an aeronautical multipoint injector[J]. Proceedings of the Combustion Institute, 2011, 33(2):2099-2107. doi: 10.1016/j.proci.2010.07.027
|
[8] |
Hideki M, Ryoichi K. Large-eddy simulation of turbulent spray combustion in a subscale aircraft jet engine combustor-predictions of NO and soot concentrations[J]. Journal of Engineering for Gas Turbines and Power, 2013, 135:1043-1052. https://gasturbinespower.asmedigitalcollection.asme.org/article.aspx?articleID=1723415
|
[9] |
Anthony C, Jeffery P. Comparing spray characteristics from Reynolds Averaged Navier-Stokes (RANS) National Combustion Code (NCC) calculations against experimental data for a turbulent reacting flow[R]. AIAA-2010-578, 2010.
|
[10] |
Cai W X. Research on numerical simulation of two-phase reacting flow field and combustion performance of annular combustors[D]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2007.
|
[11] |
Yan Y W, Song S W, Hu H S. Numerical investigations of two-phase spray combustion flow fields in slinger annular combustor[J]. Journal of Aerospace Power, 2011, 26(5):1003-1010. http://en.cnki.com.cn/Article_en/CJFDTOTAL-HKDI201105008.htm
|
[12] |
Senecal P K, Schmidt D P. Modeling high-speed viscous liquid sheet atomization[J]. International Journal of Multiphase Flow, 1999, 25(6-7):1073-1097. doi: 10.1016/S0301-9322(99)00057-9
|
[13] |
Schmidt D P, Nouar I. Pressure-swirl atomization in the near field[R]. SAE Technical Paper, 1999-01-0496.
|
[14] |
Lichtarowicz A K, Duggins R K, Markland E. Discharge coefficients for incompressible non-cavitating flow through long orifices[J]. Journal of Mechanical Engineering Science, 1965:561-580. http://en.cnki.com.cn/Article_en/CJFDTOTAL-HKDI201105008.htm
|
[15] |
Reitz R D, Diwakar R. Structure of high-pressure fuel sprays[R]. SAE Technical Paper Series 870598, 1987.
|
[16] |
Reitz R D. Modeling atomization processes in high-pressure vaporizing sprays[J]. Atomisation and Spray Technology, 1987, 3:309-337. http://adsabs.harvard.edu/abs/1987AtST....3..309R
|
[17] |
Patterson M A, Reitz R D. Modeling the effects of fuel spray characteristics on diesel engine combustion and emission[R]. SAE Technical Paper 980131, Detroit, 1998.
|