[1] |
戴昌晖, 刘天舒, 滕永光, 等.湍流附面层壁面摩擦应力的测量方法[J].航空学报, 1988, 9(5):3-10. http://www.cnki.com.cn/Article/CJFDTOTAL-HKXB198805000.htmDai C H, Liu T S, Teng Y G, et al. Measureing techniques for wall shearing stress in turbulent boundary layer[J]. Acta Aeronautica et Astronautica Sinica, 1988, 9(5):3-10. http://www.cnki.com.cn/Article/CJFDTOTAL-HKXB198805000.htm
|
[2] |
Konstantinov N I, Dragnysh G L. The measurement of friction stress on a surface[J]. DSIR RTS, 1960.
|
[3] |
Patel V C. Calibration of the Preston tube and limitations on its use in pressure gradients[J]. Journal of Fluid Mechanics, 1965, 23(1):185-208. doi: 10.1017/S0022112065001301
|
[4] |
Vagt J D, Fernholz H. Use of surface fences to measure wall shear stress in three-dimensional boundary layers[J]. The Aeronautical Quarterly, 1973, 24(2):87-91.
|
[5] |
Fiore A, Scaggs N. Calibration of a boundary layer fence technique for surface shear stress measurements in a compressible flow field[J]. Injury-international Journal of the Care of the Injured, 2013, 47(1):77-82.
|
[6] |
Nitsche W, Haberland C, Thuenker R. Comparative investigations on friction drag measuring techniques in experimental aerodynamics[C]. Icas Congress, 1984.
|
[7] |
Higuchi H. A miniature, directional surface-fence gage for three-dimensional turbulent boundary layer measurements[C]. 16th Fluid and Plasmadynamics Conference, 1983:1722.
|
[8] |
Higuchi H. A miniature, directional surface-fence gage[J]. AIAA Journal, 1985, 23(8):1195-1196. doi: 10.2514/3.9064
|
[9] |
Higuchi H, Peake D J. Bi-directional, buried-wire skin-friction gage[R]. NASA TM-78531, 1978.
|
[10] |
Fernholz H H, Janke G, Schober M, et al. New developments and applications of skin-friction measuring techniques[J]. Measurement Science & Technology, 1996, 7(10):1-2.
|
[11] |
Papen T V, Steffes H, Ngo H D, et al. A micro surface fence probe for the application in flow reversal areas[J]. Sensors & Actuators A:Physical, 2002, s 97-98(01):264-270.
|
[12] |
Schober M, Obermeier E, Pirskawetz S, et al. A MEMS skin-friction sensor for time resolved measurements in separated flows[J]. Experiments in Fluids, 2004, 36(4):593-599. doi: 10.1007/s00348-003-0728-4
|
[13] |
Papen T V, Buder U, Ngo H D, et al. A second generation MEMS surface fence sensor for high resolution wall shear stress measurement[J]. Sensors & Actuators A:Physical, 2004, 113(2):151-155. https://www.researchgate.net/publication/223376724_A_second_generation_MEMS_surface_fence_sensor_for_high_resolution_wall_shear_stress_measurement
|
[14] |
Schiffer M, Obermeier E, Grewe F, et al. Aero MEMS surface fence for wall shear stress measurements in turbulent flows[C]. AIAA Aerospace Sciences Meeting and Exhibit, 2006.
|
[15] |
孙海浪, 马炳和, 邓进军, 等.壁面剪应力测量底层隔板数学模型研究[J].航空工程进展, 2012, 3(3):373-378. http://www.cnki.com.cn/Article/CJFDTOTAL-HKGC201203026.htmSun H L, Ma B H, Deng J J, et al. Study on mathematical model of sub-layer fence for wall shear stress measurement[J]. Advances in Aeronautical Science and Engineering, 2012, 3(3):373-378. http://www.cnki.com.cn/Article/CJFDTOTAL-HKGC201203026.htm
|
[16] |
Ma B H, Ma C Y. A MEMS surface fence for wall shear stress measurement with high sensitivity[J]. Microsystem Technologies, 2016, 22(2):239-246. doi: 10.1007/s00542-015-2450-6
|
[17] |
马骋宇, 马炳和, 孙海浪, 等.面向壁面剪应力测量的底层隔板微敏感结构设计与制造[J].航空学报, 2013, 34(4):963-969. http://www.cnki.com.cn/Article/CJFDTOTAL-HKXB201304029.htmMa C Y, Ma B H, Sun H L, et al. Design and fabrication of sensitive elements of sublayer fence for wall shear stress sensor[J]. Acta Aeronautica et Astronautica Sinica, 2013, 34(4):963-969. http://www.cnki.com.cn/Article/CJFDTOTAL-HKXB201304029.htm
|
[18] |
Savelsberg R, Schiffer M, Obermeier E, et al. Calibration and use of a MEMS surface fence for wall shear stress measurements in turbulent flows[J]. Experiments in Fluids, 2012, 53(2):77-80.
|
[19] |
Schlichting H. Boundary-layer theory[M]. New York:McGraw-Hill, 1979.
|
[20] |
Ma C, Ma B, Deng J, et al. A study of directional MEMS dual-fences gauge[C]. IEEE International Conference on Nano/micro Engineered and Molecular Systems, 2015.
|
[21] |
Ma B H, Ren J Z, Deng J J, et al. Flexible thermal sensor array on PI film substrate for underwater applications[C]. The 23rd IEEE International Conference on Micro Electro Mechanical System, Hongkong, 2010:679-682.
|
[22] |
Ma B H, Zhao J G, Deng J J, et al. Fabrication of flexible hot film sensor array and its optimization[J]. Guangxue Jingmi Gongcheng/Optics & Precision Engineering, 2009, 17(8):1971-1977.
|
[23] |
Lyu H H, Jiang C Y, Deng J J, et al. Design of micro sensor for wall shear stress measurement[J]. Journal of Mechanical Engineering, 2010, 46(24):54-60. doi: 10.3901/JME.2010.24.054
|
[24] |
Padmanabhan A, Sheplak M, Breuer K S, et al. Micromachined sensors for static and dynamic shear-stress measurements in aerodynamic flows[C]. Digest of Technical Papers, Transducer'97, The 9th International Conference on Solid State Sensors & Actuators, 1997.
|
[25] |
Omid A, Julio S. A film-based wall shear stress sensor for wall-bounded turbulent flows[J]. Experiments in Fluids, 2011, 51(1):137-147. doi: 10.1007/s00348-010-1035-5
|
[26] |
Crafton J W, Fonov S D, Jones E G, et al. Measurements of skin friction in water using surface stress sensitive films[J]. Measurement Science and Technology, 2008, 19(7):075801. doi: 10.1088/0957-0233/19/7/075801
|
[27] |
Sergey F, Grant J, et al. The development of optical techniques for the measurement of pressure and skin friction[J]. Measurement Science and Technology, 2006, 17(6):1261-1268. doi: 10.1088/0957-0233/17/6/S05
|
[28] |
Brücker Ch, Spatz J, Schröder W. Feasability study of wall shear stress imaging using microstructured surfaces with flexible micropillars[J]. Experiments in Fluids, 2005, 39(2):464-474. doi: 10.1007/s00348-005-1003-7
|
[29] |
Grobe S, Schroder W. The micro-pillar shear-stress sensor MPS3 for turbulent flow[J]. Sensors, 2009, 9(4):2222-2251. doi: 10.3390/s90402222
|
[30] |
Gnanamanickam E P, Sullivan J P. Manufacture of high aspect ratio micro-pillar wall shear stress sensor arrays[J]. Journal of Micromechanics & Microengineering, 2012, 22(12):125015.
|
[31] |
Gnanamanickam E P, Nottebrock B, Große S, et al. Measurement of turbulent wall shear-stress using micro-pillars[J]. Measurement Science & Technology, 2013, 24(12):124002-124016.
|
[32] |
Taira T, Sadatake T, Kenji K, et al. Skin-friction measurements in supersonic combustion flows of a scramjet combustor[C]. AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, 2008.
|
[33] |
Tsuru T, Tomioka S, Yamasaki H. Accuracy of direct skin-friction measurements in high-enthalpy supersonic flows[J]. AIAA Journal, 2011, 49(6):1267-1271. doi: 10.2514/1.J050691
|
[34] |
Meritt R J, Schetz J A, Donbar J M, et al. Skin friction sensor for high-speed, high-enthalpy scramjet flow applications[C]. AIAA/ASME/SAE/ASEE Joint Propulsion Conference, 2014.
|
[35] |
Meritt R J, Schetz J A. Skin friction sensor development, validation, and application for high-speed, high-enthalpy flow conditions[J]. Journal of Propulsion & Power, 2016, 32(4):1-13.
|